Fire Breathing Dragon Bracelet, Men’s Stacking Gemstone Bracelets

Fire Breathing Dragon Bracelet, Men’s Stacking Gemstone Bracelets

Fire Breathing Dragon Bracelet - Men’s Stacking Gemstone Bracelet:

This striking dragon gemstone bracelet that is made from white/navy fire agate, matte black onyx and carnelian. There are four stretch bracelets in this set that look great worn alone or as a stack.

Size: 7 ¼” * Or your chosen size

#1 - Fire Breathing Dragon Bracelet

Materials Needed:

Tools Required:

Optional: EZ Bracelet Sizer – Makes accurate sizing of bracelets easy

Key Code:

A = White/Navy Fire Agate B = Black Onyx C = Carnelian D = Dragon Head, Stainless Steel


Instructions on Construction

1. Cut 13” piece of Stretch Magic, pre-stretch cord then attach bead stop to one end of stretch cord about 2” from end.

2. This bracelet will be knotted on the underside of the of the dragon head. Start by adding C (3) and threading through the underside gap on head, moving towards the mouth *selecting stones that are small enough to fit into the mouth area of dragon, A (8), B (1), A (8), C (3) *this time you will select stones that are small enough to fit into the back side of the dragon’s head. * Test for size and make adjustments as needed.

3. Tie two square knots and tighten firmly between each knot.

4. Add glue to all sides of knot, leave the bracelet for a couple of hours (time for glue to dry firmly) then trim tails.

5. Now you can try on your bracelets and admire your handiwork. Enjoy!

# 2 – Black Wolf Bracelet:

Wolf gemstone bracelet that is made from matte larvikite and black lava rock in a half and half split. This is part of the set of four stretch bracelets that look great worn alone or as a stack.

Size: 7 ¼” * Or your chosen size

Materials Needed:

Key Code:

A = Larvikite B = Black Lava Rock C = Wolf Barrel

Instructions on Construction:

1. Cut 13” piece of Stretch Magic, pre-stretch cord then attach bead stop to one end of stretch cord about 2” from end.

2. This bracelet will be knotted at center back and knot will be hidden in lava rock bead. Start by adding A (10), C (1), B (10) * Test for size and adjust as needed.

3. Tie two square knots and tighten firmly between each knot.

4. Thread one tail through lava bead then add glue to all sides of knot, pull on tail to center knot inside lava bead. Leave the bracelet for a couple of hours (time for glue to dry firmly) then trim tails.

5. Try on bracelet and enjoy!

# 3 – Monkey, Star & Moon Bracelet:

This monkey gemstone bracelet that is made from a cool combination of matte larvikite and indigo gabbro. This is part of the set of four stretch bracelets that can be worn alone or as a stack.

Size: 7 ¼” * Or your chosen size

Materials Needed:

Key Code:

A = Larvikite B = Indigo Gabbro C = Monkey, Star, Moon Bead

Instructions on Construction:

1. Cut 13” piece of Stretch Magic, pre-stretch cord then attach bead stop to one end of stretch cord about 2” from end.

2. This bracelet will be knotted at center front and knot will be hidden under monkey bead. Start by adding A (1), B (18), A (1), C (1) * Test for size and adjust as needed.

3. Tie two square knots and tighten firmly between each knot.

4. Thread one tail through monkey bead then add glue to all sides of knot, pull on tail to center knot inside monkey bead. Leave the bracelet for a couple of hours (time for glue to dry firmly) then trim tails.

5. Try on bracelet and enjoy!

# 4 – Barrel Cross Bracelet:

This barrel cross gemstone bracelet that is made from a cool combination of black onyx in matte and polished finishes. This is part of the set of four stretch bracelets that can be worn alone or as a stack.

Size: 7 ¼” * Or your chosen size

Materials Needed:

Key Code:

A = Black Onyx, matte B = Black Onyx A Grade C = Barrel Cross Bead

Instructions on Construction:

1. Cut 13” piece of Stretch Magic, pre-stretch cord then attach bead stop to one end of stretch cord about 2” from end. This bracelet will be knotted at center front and knot will be hidden under barrel cross bead. Start by adding A (1), B (18), A (1), C (1) * Test for size and adjust as needed.

2. Tie two square knots and tighten firmly between each knot.

3. Thread one tail through cross bead then add glue to all sides of knot, pull on tail to center knot inside cross bead. Leave the bracelet for a couple of hours (time for glue to dry firmly) then trim tails.

4. Try on bracelet stack and Enjoy!

Jewelry designed by Steph Stirniman at https://magpiecollectives.etsy.com/

28th Apr 2022 Steph Stirniman

Recent Posts